cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1995
Views
0
Helpful
2
Replies

how to get into privilege 15 automatically after successful login

robert.huang
Beginner
Beginner

Hi All,

When I telnet to a cisco PIX/ASA, I would like to get into privilege 15 automatically after a successful login by typing admin/cisco. I configured the following commands on the PIX but it doesn't work as expected. I still need to type in the enable password.

username admin password cisco privilege 15

aaa authentication telnet console LOCAL

aaa authentication enable console LOCAL

aaa authorization command LOCAL

How can I bypass the enable password? It's very easy to accomplish this goal on a cisco IOS device.

Thanks in advance.

Robert

2 Replies 2

Marvin Rhoads
VIP Community Legend VIP Community Legend
VIP Community Legend

I don't believe one can do this on an ASA or Pix. A security appliance is just more secure that way.

robertomuro
Beginner
Beginner

Check this thread.

https://supportforums.cisco.com/thread/2040973

Also,

http://www.cisco.com/en/US/docs/security/asa/asa81/config/guide/mgaccess.html

Per the above document you still need an additional statement:

privilege [show | clear | cmd] level level [mode {enable | cmd}] command command
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers