cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

602
Views
0
Helpful
1
Replies
Highlighted

How to Implement IP SLA in Cisco ASA?

Hi,

Here is the scenario:

ASA has two ISP-links,

primary

secondary,

both links are UP, and configured VPN on that links,

Two VPN tunnel Configured with backups.

Requirement:

Configure Cisco ASA as that way, where one link goes down, traffic should go to another. and backup vpn also take place, if backup fail primary should take place.both tunnels are active.

Cisco Asa has one MPLS links also, when MPLS links down,traffic should flow through secondary VPN.

How Cisco ASA Interesting traffic works with Routing, because Destination IP addresses are pointing towards MPLS-links and Destination IP addresses present in  VPN Interesting Traffic.(Crypto-ACL), applied on Secondory VPN.?

How to configure IP-SLA in this Scenario ?

Thanks

1 REPLY 1
Highlighted
Cisco Employee

Hi,

Please check this link:

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/118962-configure-asa-00.html

Regards,

Aditya

Please rate helpful and mark correct answers

Content for Community-Ad