05-16-2024 02:42 AM
While resetting the Cisco ASA 3110 password via romon setup, I am getting the below error
rommon 2 > confreg 0x41
Only platform-supported bits 0x00000001 are set
Can someone please help to reset Cisco ASA 3110 password
Solved! Go to Solution.
05-16-2024 04:58 AM
Kindly check below document for the password-reset for FPR3110 from Rommon:
Make sure you have the backup of the running configuration prior following the given steps.
05-16-2024 02:55 AM - edited 05-16-2024 03:09 AM
Sorry let other engineer answer you.
I dont have excat answer.
Thanks alot
MHM
05-16-2024 03:05 AM
@MHM Cisco World So to reset the 3110 ASA, can we give 0x20?
05-16-2024 04:58 AM
Kindly check below document for the password-reset for FPR3110 from Rommon:
Make sure you have the backup of the running configuration prior following the given steps.
05-16-2024 05:03 AM
After changing the confreg value to 0x21, I am getting the below screen after rebooting. Not able to break it to get in rommon and even not able to do factory reset by pressing the button in ASA.
05-16-2024 05:52 AM
Try cold reboot the device and see if you are able to break into rommon post that.
for cold reboot perform below steps:
1) power off the device physically.
2) remove the power cables and wait for 5 mins.
3) replug the power cables and switch on the device.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide