HowTo deploy ASA 9.2(3) with CSM 4.7

[Frederik Huck]

Hi all,

I ran into a CSM deploy problem. When deploying an ASA 5525-X with 9.2(3) I got following error message:

===========================================================

Major version change detected

There is a major change on device ASA-5525-X.
The image name changed on the device. Running OS version changed. OS version changed.
The provider is CLI
The version on device is: 9.2(3), platform: Cisco ASA-5525 Adaptive Security Appliance, mode: ROUTER, multiplicity: SINGLE, target type: TARGET.ASA.L3.
The version in CSM database is: 9.2(2), platform: Cisco ASA-5525 Adaptive Security Appliance, mode: ROUTER, multiplicity: SINGLE, target type: TARGET.ASA.L3.
Operation stopped.

===========================================================

[Vibhor Amrodia]

Hi,

This ASA OS is not yet supported:-

http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-7/compatibility/information/csmsd470.html#pgfId-54174

Thanks and Regards,

Vibhor Amrodia

[Frederik Huck]

Hi,

yes - I know - but I would like to deploy 9.2.3 anyway. How to tell CSM that I take the risk - just do it...

Regards, Frederik

P.S. waiting since 2 Month Cisco fixing CSCus08101   :-(