12-11-2007 01:34 PM - edited 03-11-2019 04:42 AM
hello newbie question
i am trying to access the web interface of a asa and i put the following commands
and it asks for a username and password
which is not defined on the asa
http server enable
http 172.17.14.138 255.255.255.255 inside
what else do i need?
my telnet and enable pass dont work
12-11-2007 01:42 PM
did you try https:\\FW_ip_address ? when prompted with user name leave blank and enter enable password.
for telnet add in asa:
telnet 172.17.14.138 255.255.255.255 inside
HTH
Jorge
12-11-2007 01:50 PM
thanks that worked. what would be the command
to authenticate locally or to taacas
12-11-2007 02:30 PM
Geroge, glad that worked..
to create user name locally use :
username Joe password xxxxx privilege 15
HTH
Jorge
Please rate post if resolved.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide