http server enable on pix 520

[jjcarranza]

hi.

i need to access my pix 520 through http in the inside network,

the configuration that i have is the following:

http server enable

http 0.0.0.0 0.0.0.0 inside

there is something more???

thanks,,,,,,,

[gfullage]

Is this for PDM? If so, that is a https conection and therefore requires a public and private key pair on the PIX. The easiest way to set up the PIX to accept PDM connections is to run the "setup" command from config mode, it'll ask you some questions and then create the keys for you. After that you should be able to https:// to the PIX.