HTTP Timeout on ASA 5510

[wrightsreprints]

I am trying to configure the HTTP(S) Timeout on our ASA 5510. Per MS Article 905013:

We recommend that you increase the firewall time-out values for HTTP(S)  requests to the Exchange Server Microsoft-Server-ActiveSync virtual  directory to provide a richer, "always-up-to-date" experience.  The  method that you use to increase the firewall time-out values depends on  which firewall product you use.  Refer to the firewall documentation for  information on about how to increase the firewall time-out values.

I saw the discussion here #1319238 that the option is under Global Timeouts, but I do not see an option for HTTP(s) listed. Is connection the same as HTTP(s), if not, how do I add that using the ASDM?

Cisco ASDM 6.2(1) for ASA 5510 8.2(1)

Thank you,

[Jennifer Halim]

Here is a sample configuration on what you are trying to achieve:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080624e19.shtml

You just have to modify the access-list to match your requirement.