cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

608
Views
0
Helpful
3
Replies
Volker Janusch
Enthusiast

HUM 1.2 and Windows 2008 - Server

Hello,

it is possible to run HUM with Windows 2008-Server? Problem is: It runns always CWLMS 3.2 and the customer wantes to add HUM. The hardware is not the problem.

Manager DC-Networking, Automation & WLAN
Logicalis GmbH
1 ACCEPTED SOLUTION

Accepted Solutions
Joe Clarke
Hall of Fame Cisco Employee

Yes, HUM 1.2 comes with LMS 3.2 which can be installed on a Windows 2008 server.  You don't need to install all of LMS 3.2 to get HUM.  You can just install Common Services 3.3, CiscoWorks Assistant, The CiscoWorks Portal, then HUM.

View solution in original post

3 REPLIES 3
Joe Clarke
Hall of Fame Cisco Employee

Yes, HUM 1.2 comes with LMS 3.2 which can be installed on a Windows 2008 server.  You don't need to install all of LMS 3.2 to get HUM.  You can just install Common Services 3.3, CiscoWorks Assistant, The CiscoWorks Portal, then HUM.

View solution in original post

Thank you.

Manager DC-Networking, Automation & WLAN
Logicalis GmbH
Farrukh Haroon
Engager

There is both client and server support for Windows 2008 in Ciscoworks LMS starting with release

3.2 (Common Services V3.3). Please have a look at the following links:

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp79176

http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1086601

Regards

Farrukh

Create
Recognize Your Peers
Content for Community-Ad