cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
320
Views
0
Helpful
1
Replies

IDS Management Issue

dondongamo
Level 1
Level 1

Any negative implication if same interface will be used for management and sniffing ?

1 Accepted Solution

Accepted Solutions

marcabal
Cisco Employee
Cisco Employee

That configuration is not supported. The sensor itself will attempt to prevent that configuration.

In version 4.1 there were even different interface drivers for the management interfaces on some platforms. In version 5.0 the drivers are generally the same, but the settings for the driver could differ between the management interface and the monitoring interface.

View solution in original post

1 Reply 1

marcabal
Cisco Employee
Cisco Employee

That configuration is not supported. The sensor itself will attempt to prevent that configuration.

In version 4.1 there were even different interface drivers for the management interfaces on some platforms. In version 5.0 the drivers are generally the same, but the settings for the driver could differ between the management interface and the monitoring interface.

Review Cisco Networking for a $25 gift card