Configured a new VPN from ASAV to Sonicwall.VPN Phase 1 is not coming up with an Error as the Maximum number of transmissions reached.
Phase 1 in ASA:
SonicWall config attached.
Debug logs attached
@Prashobcv93 try changing the Peer IKE ID on the Sonicwall (located in the General tab) to the private IP address of the ASA - 10.45.56.110
Tried both but no luck.
@Prashobcv93 please provide the full ASA config
ASAV config attached.
@Prashobcv93 The ASA is behind NAT but is the Sonicwall also?
Please turn on IKEv2 debugs on the ASA, attempt to establish the VPN tunnel and provide the debugs for review.
Customer end device setting needs to be applied after a reboot and their firmware is outdated.Awaiting device reboot and firmware upgrade.
I am awaiting some time after the UK business hours to enable the debug.I have the logs from the Sonicwall firewall (attached).
Customer Sonicwall was out of date and was asking for a reboot for any new changes to apply.The VPN profile in Sonicwall was flushed and recreated, and the VPN came up instantly.Thanks for your help, @Rob Ingram