Hi all,
our customer A is complaining their access is slow via frame-relay, our check-up on the router found increasing number of DE packet(in)...
1)how does this affect our customer A access performance
2)what should we do to overcome this..look at the input/output rate, very low utilization, this customer subscribing 32k CIR.
pls help
rgds
nazri
CustomerA#sh frame-relay pvc
PVC Statistics for interface Serial1/3 (Frame Relay DTE)
Active Inactive Deleted Static
Local 1 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0
DLCI = 172, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/3.172
input pkts 19160 output pkts 26984 in bytes 5167257
out bytes 5403047 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 83 in BECN pkts 3 out FECN pkts 0
out BECN pkts 0 in DE pkts 575 out DE pkts 0
out bcast pkts 1301 out bcast bytes 83264
5 minute input rate 9000 bits/sec, 5 packets/sec
5 minute output rate 6000 bits/sec, 6 packets/sec
pvc create time 2d14h, last time pvc status changed 01:45:12
CustomerA#sh clock
.07:27:39.737 CTT Wed Nov 5 2003
CustomerA#sh frame-relay pvc
PVC Statistics for interface Serial1/3 (Frame Relay DTE)
Active Inactive Deleted Static
Local 1 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0
DLCI = 172, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/3.172
input pkts 19877 output pkts 27901 in bytes 5363785
out bytes 5577926 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 87 in BECN pkts 3 out FECN pkts 0
out BECN pkts 0 in DE pkts 635 out DE pkts 0
out bcast pkts 1339 out bcast bytes 85696
5 minute input rate 4000 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 2d14h, last time pvc status changed 01:48:08
