cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8775
Views
0
Helpful
5
Replies

IP address unknown "show authentication session interface"

network_guy
Level 1
Level 1

We are currently using 802.1x with EAP-TLS machine based authenctication and every cisco example has the IP address when you do a show authentication session interface command. Our's shows up as Unknown for the IP address. We authenticate through ACS 4.0 and I can't find anything from cisco on how to have the switch retrieve the IP. Is this a configuration issue or is there a feature we are not using?

1 Accepted Solution

Accepted Solutions

Bastien Migette
Cisco Employee
Cisco Employee

Hi,

try to run command switch(config)#ip device-tracking

I assume user is authenticated ?

hope this help

View solution in original post

5 Replies 5

Bastien Migette
Cisco Employee
Cisco Employee

Hi,

try to run command switch(config)#ip device-tracking

I assume user is authenticated ?

hope this help

That worked like a charm. Thanks a lot.

You're welcome

Hello ! 

in my situation problem not solved:

WA_35#show authentication sessions interface fa0/16
Interface: FastEthernet0/16
MAC Address: b897.5a73.4edf
IP Address: Unknown
User-Name: GLOBAL\b.terlikbaev
Status: Authz Success
Domain: DATA
Oper host mode: multi-host
Oper control dir: both
Authorized By: Authentication Server
Vlan Policy: N/A
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A0A94870000F91C4E31B866
Acct Session ID: 0x000091A6
Handle: 0xAD000876

Runnable methods list:
Method State
dot1x Authc Success
mab Not run

 

SWA_35#show running-config | in ip dev
ip device tracking probe delay 1
ip device tracking

 

 

please help ! 

WS-C3650-48PS running IOS version 16.6.3-  showing same problem.  No IP address learned. Is this only learned through Device Sensor? 

Review Cisco Networking products for a $25 gift card