ips- error connecting to sensor

[kp-tkr2014]

Hi,

Card Type:          ASA_5500_Series_Security_Services_Module-10

Model:              ASA-SSM-10

App. name:          IPS

App. Status:        Up

App. Status Desc:   

App. version:       6.2(1)E3

Data Plane Status:  Up

ASA version 5520 

I cannot connect to ips module on asa 5520 , it is giving an error message " error connecting to sensor " 

Status:             Up

Thanks

[balaji.bandi]

Look the below thread may help you

https://community.cisco.com/t5/intrusion-prevention-and/unable-to-access-the-aip-ssm-through-asdm/td-p/2078782

[kp-tkr2014]

Hi,

The asa is in production , I  can see the ips is using the default ip address 192.168.1.2, 

From asa  teminal , how can I verify the ips module has properly configured  or it s just running ? 

Thanks

[balaji.bandi]

have this module configured before or working ? or you try to configure?

here is the guide if you have a default IP address :

https://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/ips/ips_qsg.html