cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
257
Views
0
Helpful
1
Replies

IPS is showing disable in asa cx 9.1 version

r.kukreja
Beginner
Beginner

Hi,

 

I have purchased asa-cx series with SSD 120gb with 9.1 version. i have given order below

ASA5525-SSD120-K9
CON-SNT-A25SDK9
SF-ASA-X-9.1.3-K8
SF-ASA-CX-9.2-K8
ASA5525-IP1Y
CAB-IND-10A
ASA-VPN-CLNT-K9
ASA5500-ENCR-K9
ASA-ANYCONN-CSD-K9
ASA5500X-SSD120INC

ASA5525-MB

 

 

 

my dir of asa is below

KCO-ASA-Vodafone# dir

Directory of disk0:/

10     drwx  4096         15:10:08 Nov 12 2014  log
20     drwx  4096         15:10:34 Nov 12 2014  crypto_archive
21     drwx  4096         15:10:44 Nov 12 2014  coredumpinfo
112    -rwx  38191104     15:13:22 Nov 12 2014  asa912-smp-k8.bin
113    -rwx  69318656     15:18:28 Nov 12 2014  asacx-5500x-boot-9.1.1-1-RelWith
DebInfo.x86_64.img
114    -rwx  18097844     15:50:32 Nov 12 2014  asdm-713.bin
115    -rwx  12998641     15:54:02 Nov 12 2014  csd_3.5.2008-k9.pkg
116    drwx  4096         15:54:02 Nov 12 2014  sdesktop
117    -rwx  6487517      15:54:04 Nov 12 2014  anyconnect-macosx-i386-2.5.2014-
k9.pkg
118    -rwx  6689498      15:54:06 Nov 12 2014  anyconnect-linux-2.5.2014-k9.pkg
119    -rwx  4678691      15:54:08 Nov 12 2014  anyconnect-win-2.5.2014-k9.pkg

8238202880 bytes total (4859731968 bytes free)

 

i am not able to see anywhere ips image and ips is showing disabled state.

Mod  MAC Address Range                 Hw Version   Fw Version   Sw Version
---- --------------------------------- ------------ ------------ --------------
   0 d46d.50cf.2ded to d46d.50cf.2df6  1.0          2.1(9)8      9.1(2)
 ips d46d.50cf.2deb to d46d.50cf.2deb  N/A          N/A
cxsc d46d.50cf.2deb to d46d.50cf.2deb  N/A          N/A

Mod  SSM Application Name           Status           SSM Application Version
---- ------------------------------ ---------------- --------------------------
 ips Unknown                        No Image Present Not Applicable

Mod  Status             Data Plane Status     Compatibility
---- ------------------ --------------------- -------------
   0 Up Sys             Not Applicable
 ips Unresponsive       Not Applicable
cxsc Recover            Not Applicable

Mod  License Name   License Status  Time Remaining
---- -------------- --------------- ---------------
 ips IPS Module     Disabled        perpetual

 

 

please help me to configure ips functionality in asa 5525-x

 

Regards

Rajat

 

 

1 Reply 1

Collin Clark
Advisor
Advisor

Make sure the SSD drive is installed. If you do a "show inventory" you should see 'Storage Device'. If it's in there then you'll need to install the bootstrap IPS image to the SSD.

http://www.cisco.com/c/en/us/td/docs/security/asa/quick_start/sfr/firepower-qsg.html#pgfId-42103

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers