IPv6 Configuration in ASA

[Mohammed Ashraf Ali]

Hi All,

I am planning to implement a ipv6 network , and i have an ASA 5510 with ios version 9.1, ILL is connected on the outside interface with ipv4 ip (124.125.111.2/30).

So my first task is to allow inside ipv6 network (2001:abc:abc::/64) to communicate to ipv4 internet.

Can any body, provide me a sample configuration for the same in ASA , i think it is called as IPv6 Nat64.

Regards,

Ashraf

[Marvin Rhoads]

This is supported on routed mode ASA firewalls. The "Configuring Network Object NAT" section of the configuration guide has details and an example.