Is this an issue NAT could solve?

[c09371]

Looking for some direction with a problem I am facing.

Environment:

ASA5550 8.2

3 interfaces:

campus 10.0.0.0/24

branch1 10.0.1.0/24

vendor 192.168.1.0/24

The FW on the other side of our vendor interface only allows IP's in from our campus network.  We have installed a machine at branch1 that needs access to the vendor network and we need the traffic translated to appear as its coming from the campus network.  I'm thinking NAT would play a part here but I'm not exactly sure what combination I would need.  I've tried a static mapping with no success.

Any solution ideas or areas that I may be able to look into?

[rvarelac]

Hi chrisatclovis, 

I think the following document might help you, I  am not sure if you are using a VPN or not on this enviroment ,but the NAT concept is the same.

https://supportforums.cisco.com/document/12612201/configure-vpn-policy-nat-between-2-asa-overlapping-networks

Hope it helps

-Randy-