ISE RADIUS dot1x authentication configure in EWC

[Translator]

Dear

I have question.

we need to configure ISE radius policy in EWC Controller AP for using users dot1x authentication.

Our AP information is like as below.

 * model: C9115AXI-R

 * OS : C9800-AP Software (C9800-AP-K9_IOSXE-UNIVERSALK9-M), Version 17.3.7

Is this version able to support dot1x authentication configuration function?

I tried to search but no any was confirmed correctly about this version.

If have information anything else, please share it.

Thank you,

Best Regards.

[Flavio Miranda]

@Translator 

 Yes, it supports.

In order to use dot1x is adding a Radius server to the WLC and then creating a SSID with WAP2 Enterpresive and 802.1x

All the information you need is on the following guide.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/17-4/config-guide/ewc_cg_17_4/authentication_and_authorization_between_multiple_radius_servers.html