L2TPv3 tunnel-marking

[ginge.evans]

I'm trying to map 802.1p CoS to DSCP when policing the ingress of an L2TPv3 tunnel endpoint interface.

2 commands exist in documentation.

set-dscp-transmit or .

However using 12.3(8)T4 on a 7206 doesn't give me the set-dscp-tunnel-transmit so i can't appear to be able to mark the new IP header with a DSCP bit and ensure that QoS is applired across the network.

Has anyone done this?

Ginge

[ginge.evans]

Sorry for the typo above.

The 2 commands available are:

set-dscp-transmit which I assume marks the original IP packet

set-dscp-tunnel-transmit which I assume marks the new outer IP Header provide as part of the L2TPv3 encapsulation process.

Ginge