07-28-2013 08:59 AM - edited 03-11-2019 07:18 PM
Hi Everyone,
I have this Layer 7 Policy Map which i config using ASDM under inspects
policy-map type inspect http test4
parameters
protocol-violation action drop-connection log
class _default_GoToMyPC-tunnel
drop-connection log
class maps identify the traffic and policy maps tell us what action to take.
Need to know on above config class map which matches the trafic is
class _default_GoToMyPC-tunnel
Regards
Mahesh
Message was edited by: mahesh parmar
Solved! Go to Solution.
08-01-2013 09:23 AM
Hello Mahesh,
It's basically null,
You are not maching anything. so nothing will get dropped
Check my blog at http:laguiadelnetworking.com for further information.
Cheers,
Julio Carvajal Segura
07-28-2013 07:12 PM
Hello,
Not sure what you ask..
Do u want to know what the class-map matches or includes?
Do show run class-map _default_GoToMyPC-tunnel
For Networking Posts check my blog at http://www.laguiadelnetworking.com/category/english/
Cheers,
Julio Carvajal Segura
07-29-2013 07:16 AM
Hi Julio,
Here i need to confirm what class map matches?
Regards
MAhesh
07-30-2013 08:23 PM
Hi Julio,
When i do
ASA1# sh run class-map _default_GoToMyPC-tunnel
!
!
ASA1#
Can you tell why the class-map output is empty?
Thanks
Mahesh
07-30-2013 11:06 PM
Hello,
Well it does not look like you add it a match statement,
Did you?
Can you share show run class-map type inspect _default_GoToMyPC-tunnel
For Networking Posts check my blog at http://www.laguiadelnetworking.com/category/english/
Cheers,
Julio Carvajal Segura
07-31-2013 05:46 PM
Hi julio,
I tried below commands but seems it does not work
ASA1# show run class-map type inspect _default_GoToMyPC-tunnel
^
ERROR: % Invalid input detected at '^' marker.
ASA1# show run class-map type inspect ?
dns Configure a class-map of type DNS
ftp Configure a class-map of type FTP
h323 Configure a class-map of type H323
http Configure a class-map of type HTTP
im Configure a class-map of type IM
rtsp Configure a class-map of type RTSP
scansafe Configure a class-map of type SCANSAFE
sip Configure a class-map of type SIP
ASA1# show run class-map type inspect default_GoToMyPC-tunnel
^
ERROR: % Invalid input detected at '^' marker.
ASA1# show run class-map type inspect_default_GoToMyPC-tunnel
^
ERROR: % Invalid input detected at '^' marker.
ASA1#
Thanks
Mahesh
07-31-2013 05:49 PM
Hello,
I missed the HTTP
show run class-map type inspect http _default_GoToMyPC-tunnel
Check my blog at http:laguiadelnetworking.com for further information.
Cheers,
Julio Carvajal Segura
07-31-2013 06:14 PM
Hi Julio,
Its here
ASA1# show run class-map type inspect http _default_GoToMyPC-tunnel
!
!
ASA1#
08-01-2013 09:23 AM
Hello Mahesh,
It's basically null,
You are not maching anything. so nothing will get dropped
Check my blog at http:laguiadelnetworking.com for further information.
Cheers,
Julio Carvajal Segura
08-01-2013 09:54 AM
Thanks Julio,
Regards
Mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide