LDAP Attribute map not selecting the correct Group-Policy(LAB SETUP).
I was setting up ldap-attribute mapping for having multiple group policies within one tunnel-group. But when i test the connection it fails to select any group-policy and fails since no IP address is being assigned.
The ldap-map is:
ciscoasa# sh run ldap attribute-map ldap attribute-map LDAP-VPN map-name memberOf Group-Policy map-value memberOf CN=VPN-External,OU=VPN-Internal,DC=EVELAB,DC=COM ra-external ciscoasa#
When i took the debug output to check:"debug ldap 255"
 memberOf: value = CN=vpn-external,OU=VPN-Internal,DC=evelab,DC=com  mapped to Group-Policy: value = CN=vpn-external,OU=VPN-Internal,DC=evelab,DC=com  mapped to LDAP-Class: value = CN=vpn-external,OU=VPN-Internal,DC=evelab,DC=com
The ldap map is also called in the correct ldap server
Check the case of your Group, as attribute values are case sensitive. You've defined your group in the LDAP map as VPN-External, however the debug determines the group as vpn-external. Amend your LDAP map.
the Cisco CPN Client for a long time to connect to a VPN Server. Now I've got a new machine with a Windows 7 64 bit. The Cisco VPN Client isn't avaiable in a 64 bit version. Cisco suggests to use Cisco AnyConnect instead because there'a 64 bit version ava...
May 2016Splunk is a powerful tool for analyzing information in your organization by collecting, storing, alerting, reporting, and analyzing machine data. With Cisco platform Exchange Grid (pxGrid) Splunk is able to proactively act on received network secu...
Happy to announce that we have an updated version of our Enabling AMP on Content Security Products - Best Practices (v3.0). Please feel free to review if you have questions regarding deployment of AMP (File Reputation and File Analysis).
Updated: July 2018
New: Updated format , Netflow configuration examples per platform (End of Table)
Note: Remember the table is scrollable horizontally to view other columns, not only vertically
IOS / IOS XE