cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
446
Views
0
Helpful
2
Replies

LDAP queries slow through Pix

NPT_2
Level 2
Level 2

I am having an issue where LDAP queries to our Mdaemon Email servers open LDAP directory on our DMZ are extremely slow taking 5 to 10 seconds for a simple name query of 500 users. If I run a query from another host on the dmz it works great, but from the inside firewall interface it is incredably slow. I have all ports enabled outbound to the email server from my subnet, and I have even tried turning off fixup protocol ILS (followed by a clear arp and clear xlate) no change. Any thoughts as to what could be slowing this down?

2 Replies 2

Patrick Iseli
Level 7
Level 7

Just pointing to another direction !

Have you verified the speed and duplex of the DMZ interface to the Switch ? Often that kind of performance problem is because of duplex miss matches.

Do a " show interface " and check if you have RUNT, CRC or other bad packets on the dmz interface.

Set port to:

auto on Switch / auto on PIX

or

100full /100Full fixed speed settings

sincerely

Patrick

Good thought, however I do have both ports set to 100Full and am seeing no errors whatsoever.

Review Cisco Networking for a $25 gift card