Management access to FWSM using CA ssl certificate

[hd_karthikeyan]

Hi,

I need to enable Management access to FWSM using CA ssl certificate.

FWSM Version 3.2(5) in Cisco 6509 switch.

Got to know how to generate, import and export certificate but my query is how to get it applied to the management ip do i need to apply in the

management interface.

[mirober2]

Hi Karthikeyan,

If you already have your trustpoints setup, you can use the 'ssl trust-point ' command to enable the use of the certificate on an interface.

Hope that helps.

-Mike