cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

266
Views
0
Helpful
1
Replies
Highlighted
Beginner

Multiple NAT translation for Same IP

Is it possible to have multiple NAT translation for same IP

We have a NAT statement as follows.

10.0.0.1 -- > 100.10.10.10

10.0.0.0/24 - 10.0.0.0/24 - Identity NAT for the traffic between same ranges. But this is not using when we have the first nat rule (NAT TO A PUBLIC IP) is  in place.

1 REPLY 1
Highlighted
Mentor

Hi,

There should be no problem with translating one IP address to many BUT this usually means somekind of Policy NAT when we are trying to translate one IP address to many different ones on a single destination interface.

Can you give a brief description of the whole setup you want to achieve?

Also we need to know your firewalls software level.

- Jouni

Content for Community-Ad