NAC MANAGER INSTALLATION PROBLEMS

[bsantana31]

Hi Guys

im trying to configure a nac manager, i did a reboot after configuring ips and it just got stop at this message "pkp_drv: module license 'CAVIUM' taints kernel" what can be the problem ???

[Waris Hussain]

Hi,

There is bug  CSCsu43508 which has  discusses this error message :

Cavium errors on NAC-3140 upon CAM/CAS startup upgraded from 4.1(0)/4.0(3)

Cavium error messages are seen on CCA-3140 CAM (Clean Access Manager) / CAS (Clean Access Server) when upgraded from releases prior to 4.1.0 / 4.0.3. The following snippet shows part of the error message that gets displayed upon CAM/CAS startup:

Starting atd: [ OK ] /etc/rc3.d/S99local: line 9: cd: /perfigo/cavium_sdk/bin/: No such file or directory /etc/rc3.d/S99local: line 9: ./init_nitrox: No such file or directory Starting perfigo: click: starting router thread pid 2973 (f743bf00)

Customers upgrading whose initial installed version was old (4.0.0-4.0.3) could see the message “pkp_drv: module license 'CAVIUM' taints kernel.” This message can be safely ignored.

There is no known workaround for this issue

here is the link for release notes of NAC 4.5

http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/45/45rn.html

Thanks

Wais Hussain

[CHRISTIAN GUZMAN]

Hola Bolivar, recientemente me encontre el mismo problema, el mensaje de :

pkp_drv: module license 'CAVIUM' taints kernel al instalar la licencia de  un CAM , como resolviste el problema?, espero me puedas ayudar. Saludos