NAT 0 from PIX TO ASA [HELP]

elouadiloubna · ‎05-19-2020

Hello,

I need to convert the following configuration to ASA:

nat (interconnection) 0 10.17.1.0 255.255.255.0
nat (inside) 0 192.168.80.0 255.255.255.0
nat (inside) 0 10.1.0.0 255.255.0.0

could someone help ?

Thanks

Marvin Rhoads · ‎05-19-2020

Here you go:

! Original statement: nat (interconnection) 0 10.17.1.0 255.255.255.0
object network OBJ-10.17.1.0-24
  subnet 10.17.1.0 255.255.255.0
nat (interconnection,any) 1 source static OBJ-10.17.1.0-24 OBJ-10.17.1.0-24 no-proxy-arp description NONAT
! Warning: Using 'any' as destination interface may be dangerous. Find real destination by looking at routes.

! Original statement: nat (inside) 0 192.168.80.0 255.255.255.0
object network OBJ-192.168.80.0-24
  subnet 192.168.80.0 255.255.255.0
nat (inside,any) 1 source static OBJ-192.168.80.0-24 OBJ-192.168.80.0-24 no-proxy-arp description NONAT
! Warning: Using 'any' as destination interface may be dangerous. Find real destination by looking at routes.

! Original statement: nat (inside) 0 10.1.0.0 255.255.0.0
object network OBJ-10.1.0.0-16
  subnet 10.1.0.0 255.255.0.0
nat (inside,any) 1 source static OBJ-10.1.0.0-16 OBJ-10.1.0.0-16 no-proxy-arp description NONAT
! Warning: Using 'any' as destination interface may be dangerous. Find real destination by looking at routes.