I need to perform NAT on the outside and DMZ interfaces. I tried using the same NAT ID of 1 for both Globals like below:
Global (outdie) 1 interface
Global (DMZ) 1 interface
nat (inside) 1 0 0
When I try to ping from the inside to outside or DMZ networks I get an error " unable to create translation entry for ....".
The I changed the NAT ID for DMZ to be 2 as follows:
global (outside) 1 interface
global (dmz) 2 interface
nat (inside) 2 192.168.0.0 255.255.0.0
nat (inside) 1 0 0
After this change, I can get translation working for DMZ but not the outside. When I try to browse the internet I get the same "unable to create transation entry error...".
What is the correct way to do NAT from inside to multiple interfaces such as outside, DMZ1, DMZ2 etc.?
Any help would be much apprecited. Thanks.