NAT on Asa

[The_guroo_2]

Hi guys I have asa with 9.1.........I have internal LAN which will go out to Internet 192.x address the same LAN talks to remote access vpn. I have a SMS but no specific nat ie static is required  I m happy if it gets the outside interface ip

Do I have to have three nat statements ? Can someone plz post a sample config

Thanks heaps

[Rashid Thompson]

you would need to setup a dynamic NAT. for example:

object network inside_nw

subnet 10.1.1.0 255.255.255.0

nat (inside,outside) dynamic interface