Need assistance in converting Juniper Netscreen firewall config to Cisco ASA please

[m-abooali]

Hello,

I need to convert a Juniper Netscreen Firewall configuration to Cisco ASA. I see that Cisco has now have a tool that does it but I was wondering if this tool works all the way or there would be tweaks needed depending on the types of configuration? any limitations?

Tool:

https://fwmig.cisco.com/register

Please advsie,

Regards,

Masood

[Francesco Molino]

Hi

I used this tool several time to migrate Screen OS config into Cisco ASA config. Every time I used it, I was quite 99% close to real config. I used it for around 10 big migrations.

As far as I know there is no limitations (I didn't face any issues). However, as usual, you need to check the config before applying it to ASA. Anyway, you'll have a log text file generated in case of some commands not converted (for sure you will few but not so much in my case.).

Did you get a try? 

Thanks

PS: Please don't forget to rate and mark as correct answer if this answered your question

[m-abooali]

Hi and thanks for your input. I have not tried it yet and it may be a week or two away from now but i wanted to do my homework before heading on site.

im glad it had worked for you and i understand few teawks here and there.

Will provide feedback as soon as i had tried it.

best Regards,

masood

[Francesco Molino]

Ok no pb. You're very welcome.

Get a try and let me know.

PS: Please don't forget to rate and mark as correct answer if this answered your question