01-09-2011 10:31 AM - edited 03-11-2019 12:32 PM
Need to configure HSRP in routers, But in ASA i have only one gateway
ROUTER 1-->ISP1
LAN --->ASA--->L3---->
ROUTER 2--->ISP2
in the above setup explain,In ASA, 2 interface used to configured VLANS , one interface for failover , One inteface for Uplink.And natting is done in router 1. I want to configure HSRP between the routers for each vlan so that i manage the traffic in ISP it need to go.Is there any idea to help me out.
Thnaks in advance
01-09-2011 12:17 PM
That is the only GW you need on the ASA.
The GW on the ASA will point to the HSRP address and not the physical address on the routers.
-KS
01-11-2011 12:57 AM
i have mutliple Vlan reaching to router which is passwng through, So for each VLAN i can create the HSRP i.e., virtual IP address so that i can decide the load balancing using the priority in which router it need to pass.By that way i'll be having each gateway virtual IP.But in ASA i can only point one gateway.is there any other way to have mutiple gateway in ASA ?
And thanks for quick reply
01-11-2011 09:49 AM
I am not sure I understand why you want multiple default gateways.
You can have multiple HSRP ips for all vlans. and different routes pointing to the HSRP ips. There can only be one default route that will be used for packets destined to routes that do not match any other routes on the box.
PK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide