09-15-2016 08:12 AM - edited 03-12-2019 01:16 AM
Hello Experts,
I have purchased a new ASA 5545. although i have enabled HTTPs and rsa on it, but when i try to access this asa using browser https, or using ASDM. none of them connects to the ASA.
attached my asa configuarion.
Also the https error output and the ASDM error
please any idea ?
Solved! Go to Solution.
09-15-2016 08:57 AM
You have the management address set as part of a /25 subnet. Is that what you intended?
I ask because the http command is set to accept sessions from the /24.
Can you confirm that asdm-761.bin is on disk0?
Also, please check that you have the 3DES-AES license ("show activation-key"). That is necessary for a modern browser or ASDM (which uses your computer's Java libraries) to connect securely.
09-15-2016 08:54 AM
Hello
Also, you can put show asp table socket for know if ASA is listening on port 443.
PS: Please don't forget to rate and mark as correct answer if this answered your question.
09-15-2016 08:57 AM
You have the management address set as part of a /25 subnet. Is that what you intended?
I ask because the http command is set to accept sessions from the /24.
Can you confirm that asdm-761.bin is on disk0?
Also, please check that you have the 3DES-AES license ("show activation-key"). That is necessary for a modern browser or ASDM (which uses your computer's Java libraries) to connect securely.
09-15-2016 09:49 AM
Hello,
Please can you set below commands:
aaa authentication http <RSA Group>
http 192.168.28.0 255.255.255.128 management
also, do show asp table socket
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide