09-27-2017 08:10 AM - edited 02-21-2020 06:23 AM
Hello ,
I'm Buying a new firewall ASA 5506-X and i don't have access to ip adresse https://192.168.1.1
This is the Error message [ SSL_ERROR_NO_CYPHER_OVERLAP ]
something is wrong with with the authentication ... Please i need Help .
Thaanks
09-27-2017 09:38 AM
Hi,
Try this way
https://interface_ip_address/admin
09-28-2017 06:27 AM
Does it happen in all browsers?
Please try the link on IE.
10-01-2017 01:44 PM - edited 10-01-2017 01:45 PM
Hello,
The error code suggest your browser does not support the same encryption ciphers as the ASAs ASDM.
Assuming you have console access - Try typing in these commands and try again:
ssl cipher default medium
ssl cipher tlsv1 medium
ssl cipher tlsv1.1 medium
ssl cipher tlsv1.2 medium
The commands set the SSL ciphers on the ASA to the medium setting.
If the above commands doesn't solve the issue - Please provide the output of the commands below:
show running-config all ssl
show version
10-18-2017 04:03 AM
Hi everyone ,
i fixed this problem , so easy !
just activate the licence .
01-19-2018 06:12 AM
How and which license did you activate?
I am trying to activate the Encryption-3DES-AES but i receive the answer "The requested activation key was not saved because it is not valid for this system."
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide