cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
308
Views
0
Helpful
1
Replies

No ip connectivity between 2 private networks, each behind a cisco asa, with an ipsectunnel between them.

CSCO11547874
Level 1
Level 1

No ip connectivity between 2 private networks, each behind a cisco asa, with an ipsectunnel between them. The ipsectunnel is up, but no ip connectivity. I did configure the networks behind each site.

One network try's to ping the other one without result.

site 1: network 192.168.16.0/24 (customer site)

site 2: network 192.168.2.0/24 (my site) with an outside interface, and an insidelan interface

Which natting do i have to setup, i think that this is the issue

can you show me in asdm, because my commandline cisco is not very well.

If you need more information please let me know.

 

Thanks in advance.

1 Reply 1

Hi,

 You actually dont need NAT. NAT has a especfic porpuse and is not required to two network to communicate.

  If network 192.168.16.0 is on the internet, outside network, in order to they ping your network, inside network, you need to allow this using ACL. You may need to allow icmp inspect. 

 

 

Review Cisco Networking for a $25 gift card