no logging hide username FTD

[Granit]

Dears,

Could you help me how to configure: no logging hide username on  FTD

Regards,

[Aref Alsouqi]

Not sure if that option is available on the UI, if not I would try to use FlexConfig and push it to the FTD.

[Granit]

Thanks Aref, do you have any document how to do with FlexConfig?

[Aref Alsouqi]

You welcome. Are you managing the FTD via FMC or FDM?

[Granit]

Via FMC

[Aref Alsouqi · Accepted solution]

Please take a look at this post on my blog, you just need to replace the command pager lines 24 I used in step 4 with no logging hide username:

https://bluenetsec.com/how-to-configure-the-pager-lines-in-ftd/

[Granit]

Hi Aref,

I tried in this way but I get this error attached:

[Granit]

Hi Aref,

Problem resolved.

I create flexconfig with command " no loggin hide username" without "g"

I do not know why they don't accept with "g"

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvj02826/?rfs=iqvred

Workaround:
Use FlexConfig to disable this.
Create a FlexConfig object with "no loggin hide username" (logging without the last G).

[Aref Alsouqi]

Thanks for sharing this.

[codewize]

This does not work on FDM managed devices. Is there a way to enter 'no logging hide username' when managing the box locally? Specifically the 1010

[codewize]

I have verified that a FlexConfig deployment using "no loggin hide username" to various other FP platforms (2100, 3100) using FMC works fine.
This does not however, work on the FP1010, at least not locally managed with FDM