05-01-2012 11:56 PM - edited 03-11-2019 04:00 PM
Dear All,
I have got new cisco ASA 5580 running 7.2(4) on it when i am trying to configured Virtual interface on vlan 400 in Gi0/0.400 to LBASE.now the problem is
from my MZ zone 10.242.107.17 to Lbase virtual interface 10.242.103.1 iam not able to ping.
Please suggest.
Many Thanks
Srini
05-02-2012 06:34 AM
Hi Srini,
A bit confusing, can you please explain it with a topology or if you can share the configuration.
Thanks,
Varun
05-02-2012 07:15 AM
Hi Varun,
Thanks for reply
iam configuring SNMP on my serverload balancer and my SLB v-lan is 400 and igiven virtual interface ip 10.242.105.1 on my ASA.
In my asa my snmp server is 10.242.103.42 now iam unable to ping from my snmp server to ace virtual ip 10.242.105.1 to discover ace on my snmp server.
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
interface Management0/1
description LAN Failover Interface
management-only
!
interface GigabitEthernet3/0
nameif OUTSIDE
security-level 0
ip address 223.27.122.19 255.255.255.240 standby 223.27.122.20
!
interface GigabitEthernet3/1
nameif DMZ
security-level 50
ip address 10.242.104.1 255.255.255.0 standby 10.242.104.2
!
interface GigabitEthernet3/2
nameif INSIDE
security-level 0
no ip address
!
interface GigabitEthernet3/2.200
vlan 200
nameif MZ
security-level 80
ip address 10.242.103.1 255.255.255.0 standby 10.242.103.2
!
interface GigabitEthernet3/2.300
vlan 300
nameif NOC
security-level 79
ip address 10.242.101.100 255.255.255.0 standby 10.242.101.101
!
interface GigabitEthernet3/2.310
vlan 310
nameif DB-NETW-1
security-level 75
ip address 10.242.110.1 255.255.255.0
!
interface GigabitEthernet3/2.400
vlan 400
nameif LBACE
security-level 90
ip address 10.242.105.1 255.255.255.0 standby 10.242.105.2
!
interface GigabitEthernet3/2.500
vlan 500
nameif DC-USERS
security-level 60
ip address 10.242.109.1 255.255.255.0
!
interface GigabitEthernet3/2.800
vlan 800
nameif DMZ-ACC
security-level 48
ip address 10.242.107.1 255.255.255.0 standby 10.242.107.2
!
interface GigabitEthernet3/2.900
vlan 900
nameif MZ-ACC
security-level 49
ip address 10.242.108.1 255.255.255.0 standby 10.242.108.2
!
interface GigabitEthernet3/3
shutdown
no nameif
no security-level
no ip address
2) ACE conf:
snmp-server community nglsnmp group Network-Monitor
snmp-server host 10.242.103.42 traps version 2c nglsnmp
snmp-server host 10.242.103.43 traps version 2c nglsnmp
snmp-server host 10.242.103.44 traps version 2c nglsnmp
snmp-server host 10.242.103.45 traps version 2c nglsnmp
snmp-server enable traps slb serverfarm
snmp-server enable traps snmp coldstart
snmp-server enable traps slb vserver
snmp-server enable traps slb real
snmp-server enable traps syslog
snmp-server enable traps snmp authentication
snmp-server enable traps snmp linkup
snmp-server enable traps snmp linkdown
please help me
srini
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide