Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I have a Cisco 5505 with a 12Mbps feed.  I want to reserve 2Mbps for RTP traffic.  I followed the QoS guide here: http://www.cisco.com/en/US/docs/security/asa/asa80/asdm60/user/guide/qos.html.Could someone please look at the attached resultant servic...

mmedwid by Level 3
  • 1415 Views
  • 5 replies
  • 0 Helpful votes

This may be an easy one for you guys, I just inherited an ASA from a purchased company. I have to assign a public IP to a host for externam access on a specific port. Can anyone tell me what the specific syntax would be on a ASA? (Scenario below)allo...

mingram27 by Level 1
  • 729 Views
  • 2 replies
  • 0 Helpful votes

Per Cisco documentations Upgrading Between Major Releases To ensure that your configuration updates correctly, you must upgrade to  each major release in turn. Therefore, to upgrade from Version 7.0 to  Version 8.2, first upgrade from 7.0 to 7.1, t...

Experts,Can this PIX be upgraded to the latest 8.X version?Below the show versionFW# sh verCisco PIX Firewall Version 6.3(4)Cisco PIX Device Manager Version 3.0(3)Compiled on Fri 02-Jul-04 00:07 by morleePerFW up 32 mins 40 secsHardware:   PIX-515, 6...

Resolved! pix 506E SNMP V3??

Hi Everyone,  i know this is an old unit but, was trying to find an article if the pix 506E support snmp version 3.thanks,Jason                  

I was remotely attacked by a hacker on my home network. I had a major spinal fusion last year that failed and I am getting married on 3 weeks. After Microsoft released a critical port 3389 patch on Msrch 12th, I was hacked remotely on march 13th. I h...

b.waddell by Level 1
  • 1752 Views
  • 0 replies
  • 0 Helpful votes

Hi GuysOn the ASA running  the 8.4.4.1 code in transparent mode.Can I create sub interfaces in different vlans and attach them to different BVI groups?switch---trunk---ASA---Trunk---switchGig0/1.1 vlan 100 bridge-gr1          Gig0/2.1 vlan 101 bridge...

Hi All,I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.Below is the output.ciscoasa# sh int ip br Interface                  IP-Address      OK? Method Status                Protocol Ethernet0/0               ...