06-26-2002 09:33 AM - edited 02-20-2020 10:07 PM
according to PIX Installation Guide, you can have up to 8 interfaces on a PIX 525 (see Note at URL : http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/pix_ig/pix525.htm#xtocid11
according to PIX Configuration Guide, you can have up to 6 interfaces defined with the nameif command(no PIX model is specified ,refer following URL and the security level parameter description : http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/mr.htm#xtocid3)
Questions : Can you explain the differences between both documentations ?
06-26-2002 09:33 AM
As far as I now, it is a simple
documentation mistake (there are
a few). I installed 7 interfaces
on a pix535 with pix5.3.1 and
it worked with all the nameifs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community