One at a time

jeff.carr · ‎10-07-2005

Have an ASA 5520 at one site with remote client VPN configured. Works well for remote users. Using a VPN pool that is never fully utilized.

Our problem is that when users at one remote site use the Cisco VPN client to connect, only one connection is successful. A new user's connection from that location knocks off the first user. These users are behind a PIX firewall using PAT. I am assuming there is an issue with multiple IPsec tunnels terminating at the same IP address?

Anyway, looking for a solution to allow multiple users to connect. Oh, and site-to-site is not an option at this time.

Thanks.

jackko · ‎10-07-2005

try applying this command,

isakmp nat-traversal

jeff.carr · ‎10-11-2005

Finally able to apply the command. Seems to work.

Thanks for the assist.

jackko · ‎10-11-2005

it's good to learn that your issue has been resolved.

according to cisco:

Why should I rate posts?

If you see a post that you think deserves recognition, please take a moment to rate it.

You'll be helping yourself and others to quickly identify useful content -- as determined by members. And you'll be ensuring that people who generously share their expertise are properly acknowledged. As posts are rated, the value of those ratings are accumulated as "points" and summarized on the Member Profile page and on each member's Preferences page.