06-03-2021 01:17 PM
Hi Everyone.
I am planning to upgrade FMCv form 6.5.0 to 6.6.0 version.
FMCv manages Multiple FTD's Instance. I see in smart license : "Out of Compliance" message. if I proceed for upgrading FMCv without procuring license, is there any impact or issue ? Please let me know.
Thank you
Solved! Go to Solution.
06-04-2021 01:23 AM
You can upgrade the FMC but, depending on what is out of compliance, you may not have the right do do so under the terms and conditions of the End User Licensing Agreement (EULA). If your FMC is licensed and under support then you have full rights to upgrade.
Any managed devices with out-of-compliance Smart licenses will not be able to deploy any policies that may use the unlicensed features. Even if you make no change to the policies that use those features, it is recommended to sync policy etc. from FMC to all managed devices following an upgrade.
06-04-2021 01:23 AM
You can upgrade the FMC but, depending on what is out of compliance, you may not have the right do do so under the terms and conditions of the End User Licensing Agreement (EULA). If your FMC is licensed and under support then you have full rights to upgrade.
Any managed devices with out-of-compliance Smart licenses will not be able to deploy any policies that may use the unlicensed features. Even if you make no change to the policies that use those features, it is recommended to sync policy etc. from FMC to all managed devices following an upgrade.
06-07-2021 05:19 AM
Hi Marvin.
Thank you.
Before i go to FTD upgrade. Would like to upgrade FMC to 6.6.x or 6.7.x. Can someone please help me with steps to upgrade FMCv via GUI and CLI.
We have Firepower 4145 model running 2.7(1.106) (2*4145 , 8 FTD instance are deployed in HA)(FTD version 6.5.0.115)
We have Firepower 4115 running 2.7(1.106)(2*4115 , 6 FTD instance are deployed in HA)(FTD version 6.5.0.115).
Please help any documents which contains upgrade procedure for FTD's.
I think, I have to upgrade -
1. FMCv
2. FXOS + FTDs instance
06-07-2021 05:41 AM - edited 06-07-2021 05:42 AM
Yes - FMCv, then FXOS (including firmware) and then FTD instances. Only the firmware is done in the cli. All others are done in the FMC or FCM GUI.
FMC Upgrade: Cisco_Firepower_Mgmt_Center_Upgrade-6.6.4-59.sh.REL.tar
https://software.cisco.com/download/home/286259687/type/286271056/release/6.6.4
FX-OS image for Firepower: fxos-k9.2.10.1.159.SPA
https://software.cisco.com/download/home/286306179/type/286287263/release/2.10.1.159
Also install the latest firmware to address a recent Field Notice:
https://www.cisco.com/c/en/us/support/docs/field-notices/720/fn72077.html
Firmware image v. 1.0.19 for Firepower 4000 Series.
fxos-k9-fpr4k-firmware.1.0.19.SPA
You upload it via FCM (it won't appear in the GUI after uploaded but can be seen in the cli) and then install it via cli.
FTD Upgrade: Cisco_FTD_SSP_Upgrade-6.6.4-59.sh.REL.tar
https://software.cisco.com/download/home/286306179/type/286306337/release/6.6.4
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide