Outbound VPN ASA5505 - Not able to connect

[staylor2112]

Is there a way to find out why a IKEv2 VPN connection (using windows VPN) is not being allowed though the firewall? Or is there a check box to allow for outbound VPN connectivity?

We have verified that the connection can be made though a secondary site that only has a Linksys firewall.

[Ashish Jhaldiyal]

You may need to enable NAT-T on ASA by issuing "crypto isakmp nat-traversal"

Ashish

[staylor2112]

I added the crypto command as you suggested, but it did not allow the VPN to be created. I am attaching our running config to look over if you dont mind.

Thank you

[Ashish Jhaldiyal · Accepted solution]

Can you try adding following commands,

policy-map global_policy
class inspection_default

inspect pptp

Ashish

[staylor2112]

That worked perfectly!

Thank you very much,

Stephen