05-29-2006 03:05 PM - edited 02-21-2020 12:56 AM
The LAN ports (1-4) appears to lock-up. Cannot ping
or get arp requests from the LAN side of the firewall. Also the activity
lights on the LAN side will stay hard light even when nothing is plugged in.
On responses to power plug off/on. Code 6.3 (5). There IS no traffic other than telnet. Used Pix 501 FOR TRAINING.
05-29-2006 11:55 PM
Hello,
Can you plug in a console cable and post the information that pops up when the 501 boots.
Patrick
05-31-2006 04:36 PM
From what I can see on a console connection is that it is going through a normal boot over and over. There is no crashinfo either?
06-01-2006 08:15 AM
Have you set the boot variable?
e.g.
boot system flash:/pix705.bin
If you cant get in to the system to find this out, I would break into Monitor mode, boot from a TFTP server and set the boot variable once you have access to the system.
06-01-2006 08:25 AM
Can you just copy and paste the information here, so that we can take a look i.e. when it boots up before it re-boots.
From what you have said it indicates a corrupt image file, but post the info and we should be able to tell.
Thanks / Jay
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide