PIX 501 Setup

[nikrushworth031168]

Hi

Des anyone have a standard setup for a PIX 501 with one externally routable IP Address on the outside, and an internal network interface of 192.168.10.150, to allow Microsft VPN clients to authenticate via L2TP or PPTP, and browse the internal network (192.168.0.0/16)

Thanks in advance.

[jmia]

Nik,

Here's a document on how to setup PPTP access via PIX:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

And here's a very good example document (PDF format) by Zandernetworks on how to setup L2TP access via PIX:

http://www.zandernetworks.co.uk/technotes/Tech%20Note%2004.pdf

Hope the above helps and if you need further help then let me know. If it does help please rate post as it may help others.

Thanks

Jay