03-12-2003 04:30 AM - edited 02-20-2020 10:37 PM
I have a pix 515 with an 4port FE card. I want to have two interfaces on my outside network ,Outside and Outside2. I want to terminate Remote Client VPNS on outside2 and Site site VPNS on Outside. When I try and add an IP address on the same net as Outside I get the following error Sorry, not allowed to enter an IP address on the same network as interface 0. Isn't this config possible? What am I not understanding here??? Thanks in advance.
03-12-2003 05:40 AM
What IPs are you trying to put in? They can be on the same major net (eg 192.168.1.x), as long as they are on different subnets, otherwise the PIX wouldn't know which interface to send packets out of.
For example:
ip address outside 192.168.1.1 255.255.255.240
ip address outside2 192.168.1.65 255.255.255.192
Hope this helps.
Steve
03-12-2003 05:50 AM
So the only way for this config to work is to have them on diferent subnets. Correct?
03-12-2003 05:55 AM
Correct. Although the PIX is not a router, it does have to have each interface on a different network.
03-12-2003 06:01 AM
Thanks for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide