03-07-2008 04:31 PM - edited 03-11-2019 05:14 AM
hi,
I just want to check if this is possible.
PIX 515E running 6.3
I want certain internal networks to
use a different PAT global address.
192.168.1.0 ---- > PAT to 203.115.155.1
192.168.2.0 -----> PAT to 203.115.155.2
so in this case anything coming from 192.168.1.0 will be translated to 203.115.155.1 on the outside interface
anything coming 192.168.2.0 will be translated to 203.115.155.2 on the
outside interface.
Solved! Go to Solution.
03-07-2008 05:08 PM
Sure, use a different NAT ID to group them to the corresponding global (PAT) address.
nat (inside) 1 192.168.1.0 255.255.255.0
nat (inside) 2 192.168.2.0 255.255.255.0
global (outside) 1 203.115.155.1
global (outside) 2 203.115.155.2
HTH
Sundar
03-07-2008 05:08 PM
Sure, use a different NAT ID to group them to the corresponding global (PAT) address.
nat (inside) 1 192.168.1.0 255.255.255.0
nat (inside) 2 192.168.2.0 255.255.255.0
global (outside) 1 203.115.155.1
global (outside) 2 203.115.155.2
HTH
Sundar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide