09-30-2009 09:24 PM - edited 02-21-2020 03:42 AM
Hi,
I've been experiencing problem with my standby pix. My outside interface becomes unavailabl after 4 hours (arp cache. I have to clear my arp table for me to access it again.
My pix is connected to a switch. 2 routers with HSRP config and the primary pix is also connected via this switch.
Stateful Failover Logical Update Statistics
Link : stateful
Stateful Obj xmit xerr rcv rerr
General 234413 0 98283969 0
sys cmd 234413 0 234413 0
up time 0 0 2 0
xlate 0 0 4672 0
tcp conn 0 0 98044436 0
udp conn 0 0 446 0
ARP tbl 0 0 0 0
RIP Tbl 0 0 0 0
from the table it seems that the arp table of the standby doesnt get refresh.
Also, i am receiving these logs
405001: Received ARP response collision from x.x.x.x/0000.0c07.xxxx on interface outside
405001: Received ARP response collision from x.x.x.x/0000.0c07.xxxx on interface outside
405001: Received ARP response collision from x.x.x.x/0000.0c07.xxxx on interface outside
405001: Received ARP response collision from x.x.x.x/000d.xxxx.xxxx on interface outside
405001: Received ARP response collision from x.x.x.x/0000.0c07.xxxx on interface outside
405001: Received ARP response collision from x.x.x.x/000d.xxxx.xxxx on interface outside
is this the cause why the arp table counter doesnt have a value? whats the work around for this? hope someone could help.
Thanks
09-30-2009 11:38 PM
Another issue that im having is that from standby pix why is it that the mac of the primary is being used by the mac of VIP of the router?
10-09-2009 11:52 PM
static arp binding can resolve your issue
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide