12-05-2007 08:28 AM - edited 03-11-2019 04:39 AM
Hi All
Friends, i hope i can find my answer here... I configured my PIX 525 with ASDM. It has two interfaces ,, Inside and Outside''... For inside Ethernet i use my network and for Outside Internet. From PIX i can ping every IP address but from my notebook i can not ping outside's interfaces IP address and gateway... what must be the most common reason ?!
plz, help meeee....
Regards, batumi3
Solved! Go to Solution.
12-06-2007 01:12 AM
I guess not, if you are able to ping other outside addresses from your inside host, then perhaps there may be something spooky going on with your ISP. Then again if you can ping certain addresses from your pix that you can't from your inside host, that is odd. Pls post a sanitized config so we can confirm everything is OK at your end.
12-05-2007 08:58 AM
Hi
It sounds like you may not have your address translation set up. This may be set up in a variety of ways as described (for ASDM or CLI) here for pix/asa running 7.x:
or here for pre 7.x (CLI):
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800b6e1a.shtml
If you are still having issues pls post your (sanitized) configuration
HTH
Kev
12-05-2007 09:22 AM
Kev, great TNX
i forgot to write this one... i can not ping DNS server ... but i could ping another ISP DNS server or for example 4.2.2.2 ... Do you stil think that it's NAT problem ?
12-06-2007 01:12 AM
I guess not, if you are able to ping other outside addresses from your inside host, then perhaps there may be something spooky going on with your ISP. Then again if you can ping certain addresses from your pix that you can't from your inside host, that is odd. Pls post a sanitized config so we can confirm everything is OK at your end.
12-06-2007 07:23 AM
Kev,
They juse closed icmp echo-reply... today i cheked it it's working fine. TNX
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide