PIX 7.02(2) doesn't allow VPN client local LAN access

[depadua_chris]

I've just upgraded my PIX 515E from 6.3(3) to 7.02(2) and I'm having trouble with some of my VPN Clients (ver 4.6). When the clients connect they loose connectivity to locally mapped drives.

I am aware of the check box on the transport tab that "Allows local LAN access" but that doesn't seem to make a difference here. I'd appreciate any suggestions you may have to offer.

Thanks!

[r-simpson]

This sample configuration shows two different versions of VPN Clients connecting and encrypting traffic with the PIX as the tunnel endpoint. In this configuration, a pool of addresses is configured to be assigned for IP Security (IPSec).

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml