PIX Device Manager

[newteknet]

I am new to Cisco PIX. We have a PIX 501 and I am not able to access the Device manager through the browser. I get a screen where it says the device manager is loading, but it doesnt go anywhere. BTW I am trying to access from a Windows 2003 Server. I checked all the IE settings and seems to be OK.

Any help is appreciated.

Thanks

Sridhar

[sguerrero]

In order to access the PDM, you need to enable DES or 3DES, http server enable, http a.b.c.d netmask outside/inside, here it goes the IP address form where you will run PDM.

Here you have two good documents related to PDM, configuration and troubleshooting.

http://www.cisco.com/en/US/partner/products/sw/netmgtsw/ps2032/products_installation_guide_chapter09186a008017a423.html

and for troubleshooting:

http://www.cisco.com/en/US/partner/products/sw/netmgtsw/ps2032/products_installation_guide_chapter09186a008017a424.html

[baileja]

You must also have Suns Java supplicant

[mostiguy]

win2k3 server out of the box has incredibly tight ie browser security settings. I would recommend using some other machine to test the PDM first, as almost any other IE setup will have more relaxed settings