PIX Failover Syslogging

[m-raft]

I am running an old PIX version 5.0(3) in a failover configuration and keep receiving the following messages:

Feb 20 08:54:50 [x.x.1.249.2.2] Feb 20 2002 10:04:54: %PIX-3-210008: LU no xlate for x.x.49.100/3819 63.251.224.169/443

Feb 20 09:04:30 [x.x.1.249.2.2] Feb 20 2002 10:14:37: %PIX-3-210008: LU no xlate for x.x.18.180/1208 168.144.1.11/443

Feb 20 09:12:12 [x.x.1.249.2.2] Feb 20 2002 10:22:19: %PIX-3-210008: LU no xlate for x.x.118.178/1474 64.4.53.7/443

Feb 20 09:13:16 [x.x.1.249.2.2] Feb 20 2002 10:23:23: %PIX-3-210008: LU no xlate for x.x.162.65/1528 64.245.58.81/21

Feb 20 09:15:26 [x.x.1.249.2.2] Feb 20 2002 10:25:33: %PIX-3-210008: LU no xlate for x.x.113.138/2867 129.198.114.6/443

Feb 20 09:18:18 [x.x.1.249.2.2] Feb 20 2002 10:28:25: %PIX-3-210008: LU no xlate for x.x.125.170/1304 208.187.174.35/23

Feb 20 09:18:18 [x.x.1.249.2.2] Feb 20 2002 10:28:25: %PIX-3-210008: LU no xlate for x.x.110.122/1170 205.225.145.71/17731

Feb 20 09:18:18 [x.x.1.249.2.2] Feb 20 2002 10:28:25: %PIX-3-210008: LU no xlate for x.x.125.170/1304 208.187.174.35/23

Feb 20 09:18:18 [x.x.1.249.2.2] Feb 20 2002 10:28:25: %PIX-3-210008: LU no xlate for x.x.110.122/1170 205.225.145.71/17731

Feb 20 09:18:18 [x.x.1.249.2.2] Feb 20 2002 10:28:25: %PIX-3-210008: LU no xlate for x.x.125.170/1304 208.187.174.35/23

Feb 20 09:18:18 [x.x.1.249.2.2] Feb 20 2002 10:28:25: %PIX-3-210008: LU no xlate for x.x.110.122/1170 205.225.145.71/17731

I've done a wr standby from the primary which is supposed to fix this problem but continue to get the messages.

Has anyone seen this before and been able to fix it???

thanks

[zletaief]

Hi,

"

%PIX-3-210007: LU allocate xlate failed

Explanation Stateful Failover failed to allocate an translation slot (xlate) record.

Action Check the available memory using the show mem command to make sure the PIX Firewall has free memory in the system. If memory has been used up, you may need to add more physical memory.

"

[zletaief]

Hi,

"

%PIX-3-210007: LU allocate xlate failed

Explanation Stateful Failover failed to allocate an translation slot (xlate) record.

Action Check the available memory using the show mem command to make sure the PIX Firewall has free memory in the system. If memory has been used up, you may need to add more physical memory.

"

[m-raft]

I have made the memory check and memory looks okay. Any other ideas?