cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
841
Views
0
Helpful
4
Replies

PIX OS version ??

yann.boulet
Level 1
Level 1

Hello all,

at the moment i have a pix 525 with an OS V 7.0(4) and ASDM V 5.0(4) i want to upgrade OS and ASDM but in cisco software download i have V 7.2(2) last release.

My question is can i upgrade with a V 7.2(x) or do i need to continue with a V 7.0(x) and what are the differences ?

Thanks

2 Accepted Solutions

Accepted Solutions

David White
Cisco Employee
Cisco Employee

Hi Yann,

You can run either the 7.0 train or the 7.2 train. The 7.0 train is more stable, so if you don't need a new feature introduced in 7.2, then I would stay with 7.0(6).

The bulk of the features added between 7.0 and 7.2 are VPN/WebVPN releated features. You can view the release notes for 7.1.1 and 7.2.1 to see the new features added.

Hope it helps,

David.

View solution in original post

abinjola
Cisco Employee
Cisco Employee

7.0.4 is FIPS Certified

http://www.cisco.com/en/US/netsol/ns340/ns394/ns171/networking_solutions_audience_business_benefit0900aecd8009a16f.html

Well if you ask my opinion then I would suggest you to run 7.2.2 however no version is entirely bugfree

The other option for you would be to upgrade the firewall to 7.0.6, this code has been

seen as quite a stable code

Refer to the following link for the release notes of 7.0.6 and 7.2.2

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_70/70_rn/

pix706rn.htm

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_72/rel_no

te/pixrn722.htm

View solution in original post

4 Replies 4

David White
Cisco Employee
Cisco Employee

Hi Yann,

You can run either the 7.0 train or the 7.2 train. The 7.0 train is more stable, so if you don't need a new feature introduced in 7.2, then I would stay with 7.0(6).

The bulk of the features added between 7.0 and 7.2 are VPN/WebVPN releated features. You can view the release notes for 7.1.1 and 7.2.1 to see the new features added.

Hope it helps,

David.

abinjola
Cisco Employee
Cisco Employee

7.0.4 is FIPS Certified

http://www.cisco.com/en/US/netsol/ns340/ns394/ns171/networking_solutions_audience_business_benefit0900aecd8009a16f.html

Well if you ask my opinion then I would suggest you to run 7.2.2 however no version is entirely bugfree

The other option for you would be to upgrade the firewall to 7.0.6, this code has been

seen as quite a stable code

Refer to the following link for the release notes of 7.0.6 and 7.2.2

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_70/70_rn/

pix706rn.htm

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_72/rel_no

te/pixrn722.htm

ok so there is no big difference between 7.0 and 7.2 but are there differences between ASDM version because if i have a 7.0 version i need to install a specifical version of ASDM, is there more feature in one or other one version ?

Yes, there are additional features in later ASDM release. Specifically, there are enhancements to viewing the syslogs, so you can edit rules by right clicking on the syslog. And ASDM 5.2 also introduced packet-tracer to help determine where a packet may be dropped - based on your config - or what rules a packet is matching as it passes through the box. (Packet tracer was implemented on the ASA side in version 7.2).

Sincerely,

David.

Review Cisco Networking for a $25 gift card