Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,currently we have some limitations with our ISP load balancing, we are using only one public IP but there are a lot of TCP connections behind this PAT and a few SRC IP and DST IP because of public Cloud applications so I want to start using ...
Hi all,we are trying to troubleshoot something very strange, we have 2 DC connected with L2 link at 500 Mbps, icmp is ok on each side but TCP applications are very slow, file transfer for example, it takes half an hour to transfer 52MB, slowness is i...
Hi all,I want to know if I can do that with my ASA5515-X, I have two servers that can do the same thing, there are SSO servers, What I want to do is to publish the 2 servers on Internet with the same public IP address and on TCP 443.Is it supported ?...
Hi all,I want to know what is the best way to black traffic inside the same VLAN, this VLAN is a user VLAN, it means that I am talking about access layer.I wanted to use private vlan, but C2960S doesn't support this feature.can you advise me another ...
Hi all,I would like to do the following architecture with the same C3750 : network X,Y,Z connected to 3750 in VRF D the 3750 uses a routed interface on subnet E for the default route in VRF D on this routed interface a BYPASS EQUIPMENT the other BYPA...
I think i miss something what would be the default behavior if I just configure the round robin with a new IP ? will it be a random usage of each IP or will it wait until first IP is full to use the second ?thanks
thanks for that but if I read your link : (Optional) Enables round-robin address allocation for a PAT pool. By default, all ports for a PAT address will be allocated before the next PAT address is used. The round-robin method assigns an address/port ...
Hi all,thank you for everything, it was a misconfiguration on the ISP side, each side was configured at 500mb/s but in the ISP backbone something was wrong and was limited to 100mb/s thank you
OK to check the server side but there are a lot of servers with the same behavior and we did the test in another vlan and the behavior seems to be the same.thanks
